10-Port Gigabit Ethernet PoE Switch PLANET GSD-1008HP

Mô tả

10-Port Gigabit Ethernet PoE Switch PLANET GSD-1008HP

– Support 10-port 10/100/1000BASE-T Gigabit Ethernet RJ45 copper with 8-port IEEE 802.3af/at PoE Injector (Port-1 to Port-8).

Power over Ethernet

– Complies with IEEE 802.3af/at Power over Ethernet end-span PSE.

– Up to 8 ports of IEEE 802.3af/802.3at devices powered.

– Supports PoE power up to 32 watts for each PoE port.

– Each port supports 54V DC power to PoE powered device.

– 120-watt PoE budget.

– Auto detects powered device (PD).

– Supports PD alive check.

– Circuit protection prevents power interference between ports.

– Remote power feeding up to 100m in standard mode with 250m in extended mode.

Switching

– Hardware-based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X.

– Flow control for full duplex operation and back pressure for half duplex operation.

– Integrates address look-up engine, supporting 2K absolute MAC addresses.

– 9K jumbo frame supports all speeds (10/100/1000Mbps).

– Hardware DIP switch for Standard, VLAN and Extend mode selection; the Extend mode features 20-watt PoE transmit distance of 250m at speed of 10Mbps and VLAN isolation (Only for Port-1 to Port-8).

– Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing.

Hardware

– 9-inch desktop size, 1U height, rack mountable.

– LED indicators for system power, per port PoE ready and PoE activity, speed, Link/Act.

– 1 silent fan to provide stable and efficient power performance.

– Supports Energy-Efficient Ethernet (EEE) function (IEEE 802.3az).

Specifications

Hardware Specifications
Copper Port 10 10/100/1000BASE-T MDI/MDIX Ports
PoE Injector Port 8-port with 802.3af/at PoE injector function with Port-1 to Port-8
Switch Architecture Store-and-Forward
Switch Fabric 20Gbps
Switch Throughput@64 bytes 13.4Mpps@64 bytes
MAC Address Table 2K entries, automatic source address learning and aging
Maximum Frame Size 9K bytes
Flow Control IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
LED Indicators – System: Power (Green)
– 10/100/1000BASE-T RJ45 interfaces: 10/100/1000Mbps LNK/ACT (Green)
– PoE interfaces: PoE-in-Use (Amber)
DIP Switch Selectable operation mode
– Standard
– VLAN
– Extend
Dimensions (W x D x H) 220 x 150 x 43 mm (1U height)
Enclosure Metal
Weight 1205 g
Power Requirements AC 100~240V, 50/60Hz, 2.5A max.
Power Consumption/ Dissipation System On: Max. 4.1 watts/13.9 BTU
PoE Full Loading: Max. 124 watts/423.1 BTU
ESD Protection Contact discharge of 6KV DC
Air discharge of 8KV DC
Thermal Fan 1
Power over Ethernet
PoE Standard IEEE 802.3af Power over Ethernet/PSE
IEEE 802.3at Power over Ethernet Plus/PSE
PoE Power Supply Type End-span
PoE Power Output Per port 54V DC, 600mA. max. 32 watts
Power Pin Assignment 1/2 (+), 3/6 (-)
PoE Power Budget 120 watts
Max. Number of Class 2 PDs 8
Max. Number of Class 3 PDs 8
Max. Number of Class 4 PDs 4
Standards Conformance
Regulatory Compliance FCC Part 15 Class A, CE
Standards Compliance IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab Gigabit 1000BASE-T
IEEE 802.3x Flow control and back pressure
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3az Energy Efficient Ethernet (EEE)
Environment
Operating Temperature: 0 ~ 50 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Storage Temperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)

– Bảo hành: 12 tháng.