8-Port Gigabit Smart PoE Switch HIKVISION DS-3E1510P-SI

3.204.000 

Mô tả

8-Port Gigabit Smart PoE Switch HIKVISION DS-3E1510P-SI

– 8 × gigabit PoE ports, and 2 × gigabit fiber optical ports.

– IEEE 802.3at/af standard for PoE ports.

– Network topology management, alarm push, network health monitor.

– 6 KV surge protection for PoE ports.

– AF/AT camera can reach up to 300 m in extend mode.

– PoE watchdog to auto detect and restart the cameras that do not respond.

– Various layer 2 management protocols such as STP/RSTP, VLAN, link aggregation, SNMP, QoS and so on.

Specification

Model DS-3E1310P-SI
Network Parameters 
Port Number 8 × 100 Mbps PoE RJ45 port, and 2 × gigabit combo
Port Type RJ45 port, full duplex, MDI/MDI-X adaptive
Standard IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, and IEEE 802.3z
Forwarding Mode  Store-and-forward switching
Working Mode Standard mode (default)
Extend mode
MAC Address Table  16 K
Switching Capacity 5.6 Gbps
Packet Forwarding Rate 4.1664 Mpps
Internal Cache  4 Mbits
PoE Power Supply  
PoE Standard  IEEE 802.3af, IEEE 802.3at
PoE Power Pin End-span: 1/2(-), 3/6(+)
Mid-span: 4/5(+), 7/8(-)
8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
PoE Port  Ports 1 to 8
Max. Port Power 30W
PoE Power Budget  125 W
Software Function 
Device Maintenance Remote upgrade, default parameters recovery, logs viewing, basic network parameters configuration, import
and export configuration, time sync
Port Configuration Port rate configuration, slow control, and ports enabling
Long Range Up to 300 m transmission
PoE Configuration PoE watchdog: Ports 1 to 8 auto detect and restart the cameras that do not respond.
PoE enabling: Support
Port Rate-Limiting Rate-limiting for ingress and egress ports
Storm Control  Storm control of unknown unicast, multicast and broadcast
Port Mirroring Support
Link Aggregation  Static link aggregation supported for G1 and G2 port
Port Isolation Ports in isolation group cannot communicate with each other
QoS  WRR and SP scheduling and port priority
VLAN 4094 VLANs
STP STP and RSTP protocols
SNMP SNMPv1 and SNMPv2c supported for obtaining node information of the system and interfaces
LLDP LLDP protocol supported for port configuration, global configuration and neighbor discovery
General 
Shell  Metal material
Power Supply 100 VAC~240 VAC, 50/60 Hz, Max. 1.5 A
Max. Power Consumption 150 W
Power Consumption in
Idle
5W
Dimension 266 × 44.5 × 220.8 mm
Weight  2.20 kg

– Bảo hành: 24 tháng.