Mô tả
Key Features:
• Up to 2.69Gbps combined peak datarate
• WPA3 and Enhanced Open security
• Built-in technology that resolves sticky client issues
for Wi-Fi 6 and Wi-Fi 5 devices
• OFDMA and MU-MIMO for enhanced multi-user
efficiency
• IoT-ready Bluetooth 5 and Zigbee support
• Embedded ranging technology for accurate indoor
location measurements
Specifications:
Hardware variants
• AP-514: External antenna models
• AP-515: Internal antenna models
Wi-Fi radio specifications
• AP type: Indoor, dual radio, 5GHz 802.11ax 4×4 MIMO and
2.4GHz 802.11ax 2×2 MIMO
• 5GHz radio:
– Four spatial stream Single User (SU) MIMO for up to
4.8Gbps wireless data rate to individual 4SS HE160
802.11ax client devices (max)
– Two spatial stream Single User (SU) MIMO for up to
1.2Gbps wireless data rate to individual 2SS HE80
802.11ax client devices (typical)
– Four spatial stream Multi User (MU) MIMO for up to
4.8Gbps wireless data rate to up to four 1SS or two 2SS
HE160 802.11ax DL-MU-MIMO capable client devices
simultaneously (max)
– Four spatial stream Multi User (MU) MIMO for up to
2.4Gbps wireless data rate to upto four 1SS or two 2SS
HE80 802.11ax DL-MU-MIMO capable client devices
simultaneously (typical)
• 2.4GHz radio:
– Two spatial stream Single User (SU) MIMO for up to
574Mbps wireless data rate to 2SS HE40 802.11ax client
devices (max)
– Two spatial stream Single User (SU) MIMO for up to
287Mbps wireless data rate to 2SS HE20 802.11ax client
devices (typical)
• Support for up to 512 associated client devices per radio,
and up to 16 BSSIDs per radio
• Supported frequency bands (country-specific
restrictions apply):
– 2.400 to 2.4835GHz ISM
– 5.150 to 5.250GHz U-NII-1
– 5.250 to 5.350GHz U-NII-2A
– 5.470 to 5.725GHz U-NII-2C
– 5.725 to 5.850GHz U-NII-3/ISM
– 5.850 to 5.895GHz U-NII-4
• Available channels: Dependent on configured
regulatory domain
• Dynamic frequency selection (DFS) optimizes the use of
available RF spectrum
• Cyclic delay/shift diversity (CDD/CSD) for improved
downlink RF performance
• Space-time block coding (STBC) for increased range and
improved reception
• Low-density parity check (LDPC) for high-efficiency error
correction and increased throughput
• Transmit beam-forming (TxBF) for increased signal
reliability and range
• 802.11ax Target Wait Time (TWT) to support low-power
client devices
• 802.11mc Fine Timing Measurement (FTM) for precision
distance ranging
Wi-Fi antennas
• AP-514: Four (female) RP-SMA connectors for external
dual band antennas (A0 through A3, corresponding
with radio chains 0 through 3). Worst-case internal loss
between radio interface and external antenna connectors
(due to diplexing circuitry): 1.3dB in 2.4GHz and 1.7dB in
5GHz.
• AP-515: Four integrated dual-band downtilt
omni-directional antennas for 4×4 MIMO with peak
antenna gain of 4.2dBi in 2.4GHz and 7.5dBi in 5GHz.
Built-in antennas are optimized for horizontal ceiling
mounted orientation of the AP. The downtilt angle for
maximum gain is roughly 30 degrees.
– Combining the patterns of each of the antennas of the
MIMO radios, the peak gain of the effective per-antenna
pattern is 3.8dBi in 2.4GHz and 4.6dBi in 5GHz.
