Mô tả
| Software |
– Cisco Unified Wireless Network Software Release 8.9.x or later
– Cisco IOS ® XE Software Release 16.11 with AP Device Pack, or later
|
| Supported wireless LAN controllers |
– Cisco Catalyst 9800 Series Wireless Controllers
– Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller
|
| 802.11n version 2.0 (and related) capabilities |
– 4×4 MIMO with four spatial streams
– Maximal Ratio Combining (MRC)
– 802.11n and 802.11a/g beamforming
– 20- and 40-MHz channels
– PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)
– Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
– 802.11 Dynamic Frequency Selection (DFS)
– Cyclic Shift Diversity (CSD) support
|
| 802.11ac |
– 4×4 downlink MU-MIMO with four spatial streams
– MRC
– 802.11ac beamforming
– 20-, 40-, 80-, and 160-MHz channels
– PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz)
– Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
– 802.11 DFS
– CSD support
|
| 802.11ax |
– 4×4 downlink MU-MIMO with four spatial streams
– Uplink/downlink OFDMA
– TWT
– BSS coloring
– MRC
– 802.11ax beamforming
– 20-, 40-, 80-, and 160-MHz channels
– PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz)
– Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
– 802.11 DFS
– CSD support
|
| Integrated antenna |
Flexible radio (either on 2.4GHz or on 5GHz) – 2.4 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth
– 5 GHz, peak gain 5 dBi, internal antenna, omnidirectional in azimuth
Dedicated 5GHz radio – 5 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth
|
| External antenna (sold separately) |
– Cisco Catalyst 9120E Access Points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz)
– Cisco Catalyst 9120P Access Points) are certified for use with antenna gains up to 13 dBi (2.4 GHz and 5 GHz) with the AIR-ANT2513-P4M-N= antenna
– Cisco offers the industry’s broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios
– Supports Self-Identifiable Antennas (SIA) on one RP-TNC port
|
| Smart Antenna Connector |
– Available on the 9120E and on the 9120P only
– Compact multi RF connector with DART interface
– Requires the AIR-CAB002-DART-R= 2 ft smart antenna connector when used with antennas with RP-TNC connector
– Required when running the flexible radio as either a second 5-GHz serving radio or a Wireless Security Monitoring radio
|
| Interfaces |
– 1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz
– Management console port (RJ-45)
– USB 2.0 @ 3.75W (enabled via future software)
|
| Indicators |
– Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
|
| Dimensions (W x L x H) |
8.5 x 8.5 x 1.7” (21.6 x 21.6 x 4.3 cm)
|
| Weight |
2.87 lbs (1.3 kg)
|
| PoE Power Consumption |
802.3at (PoE+)
|
| 2.4-GHz radio | 4×4 |
| 5-GHz radio | 4×4 |
| Link speed | 2.5G |
| USB | Yes |
| LLDP | 25.5W |
